English
русский
Untuk menjadikan hidup lebih berwarna
PVC wood grain decorative film is a material commonly used for home decoration, which can add a natural wood grain effect to furniture, walls and other surfaces. However, not all surfaces or substrates are suitable for PVC wood grain decorative film. This article will reveal which types of surfaces or substrates are most suitable for applying PVC wood grain decorative film and provide readers with tips for selection.
smooth surface
The surface on which PVC wood grain decorative film has the best adhesion effect is a smooth and flat surface. This ensures that the decorative film will fit perfectly, avoiding voids and bubbling. Surfaces suitable for applying PVC wood grain decorative film include glass, metal, ceramics and other smooth materials.
Surface free of oil or dust
Before applying PVC wood grain decorative film, the surface must be thoroughly clean and free of oil or dust. This is to ensure that the decorative film adheres firmly and is not affected by contaminants. Therefore, the surface suitable for applying PVC wood grain decorative film should be thoroughly cleaned and treated.
flat substrate
In addition to the smoothness of the surface, the flatness of the base material is also an important factor in applying PVC wood grain decorative film. The higher the flatness of the substrate, the better the decorative film will fit. The base materials suitable for applying PVC wood grain decorative film include wooden boards, MDF boards and other flat materials.
When choosing a surface or substrate suitable for applying PVC wood grain decorative film, you should consider a smooth surface, a surface without oil or dust, and a flat substrate. These factors will ensure that the decorative film will fit perfectly and have a long-lasting effect. When undertaking a decorating project, it is important to choose the appropriate surface or substrate for the best decorative effect.
